Golden Glow Unfaced building insulation is a light density thermal and acoustical fiber glass insulation bonded with a thermosetting resin. This flexible insulation will not stain or corrode metal studs, rot or sustain fungi or vermin. Golden Glow will not shrink or settle from exposure, vibration, temperature or humidity. Where vapor control is required, a separate code accepted poly vapor barrier can be used with this product. Golden Glow is manufactured in a variety of R-values. The higher the R-value, the greater the insulating power. Choose the proper thickness for the design.

Golden Glow Kraft Faced building insulation is a light density thermal and acoustical fiber glass insulation bonded with thermo-setting resin. This flexible insulation will not stain or corrode metal studs, rot or sustain fungi or vermin. Golden Glow will not shrink or settle from exposure, vibration, temperature or humidity.

For applications requiring a flangeless batt, CSI offers a
fiber glass insulation batt without stapling tabs on the kraft facing. This superior friction fit batt installs quickly without stapling and still provides the vapor barrier required by most building codes. Golden Glow flangeless batts are designed for installation between wood or steel stud exterior wall framing.

Golden Glow's faced building insulation is manufactured using a three part foil/skrim/kraft vapor retarder adhered to the fiber glass batt. Tabs or flanges are provided at the edges for taping to the face or inside of the stud. The FSK-25 facing has a vapor transmission (perm) rating of 0.05 or less. OFI FSK-25 faced batts comply with ASTM C665, Type III, Class A. FSK-25 batts are designed for use where a Class A flame spread rating (25 or less) is required. Golden Glow FSK-25 faced batts are manufactured in a variety of R-values. The higher the R-value, the greater the insulating power. Choose the proper thickness for the design.

Foil-faced building insulation is manufactured using an aluminum foil vapor retarder adhered to the fiber glass batt. Tabs or flanges are provided at the edges for stapling or taping to the face or inside of the stud. The foil facing has a vapor transmission (perm) rating of 0.05 or less. Golden Glow Foil faced batts are manufactured in a variety of R-values. The higher the R-value, the greater the insulating power. Choose the proper thickness for the design.

The 193 WallFoam System by Gaco is an HFC blown (zero-ozone depleting) liquid spray system that cures to a low-density rigid polyurethane insulation material. Gaco WallFoam 193 contains material derived from naturally renewable resources and does not contain CFC’s, HCFC’s or other gases harmful to the environment. This system can be sprayed on clean dry substrates down to 35°F (1.66°C). Refer to Gaco Western General Instructions, SG-GacoFoam for spraying instructions. Gaco WallFoam 193 is a Class I fire rated foam.

Gaco's WallFoam System 173 is an HFC blown (zero-ozone depleting) liquid spray system that cures to a low-density rigid polyurethane insulation material. WallFoam 173 contains material derived from naturally renewable resources and does not contain CFC’s, HCFC’s or other gases harmful to the environment. This system can be sprayed on clean dry substrates down to 40°F (1.66°C). Refer to the Gaco Western General Instructions, SG-GacoFoam for spraying instructions. Gaco WallFoam 173 is a Class 1 fire rated foam.

GacoGreen PF-052 is a water blown spray-applied system that cures to a semi-rigid very low-density foam. In place density ranges from 0.50 – 0.65 lb/ft³. The cured product is dimensionally stable in all weather conditions and its insulating properties do not significantly diminish over time. GacoGreen is safe for the environment, containing no formaldehyde or ozone depleting chemicals. GacoGreen 052 is a Class I fire rated foam.

Download Submittal Sheet